Racing time!

Por Tuareg -
This weekend finally we went to a new place to race with electric go karts!  It was fun and exciting!!!  I expect that we can go in the near future. 

You have certain amount of time (minutes) so it depends on your skills how many turns you can do.




The name of the place? "Volta Racing Labs".

Comentarios

Publicar un comentario

Entradas más populares de este blog

TV Sabrent SBT-TVFM con GNU/Linux Debian (LifeView/Typhoon FlyVIDEO2000)

Por Tuareg -
Imagen
Ya les había platicado sobre la tarjeta para ver la tv por cable en la computadora de casa. La tarjeta es de la marca Sabrent , reconocida por el kernel de Linux como Sabrent SBT-TVFM (saa7130) con chip Philips. Tuve un problema con udev ya que las aplicaciones que instalé con GNU/Linux Debian, me decían que no pueden acceder al dispositivo /dev/video0. Esto es porque udev lo crea dentro /dev/.static/dev/video0, pero el día de hoy las aplicaciones ya pueden acceder a este directorio, yo no hice nada realmente, supongo que es debido a una actualización de kernel que hubo recientemente. Este es el kernel que tengo instalado: 2.6.18-5-686 #1 SMP Wed Sep 26 17:54:59 UTC 2007 i686 GNU/Linux Ahora si estoy más que contento de que la tarjeta funciona bien, la he probado con: kdetv tvtime xawtv Con todas las aplicaciones obtengo imágen y sonido, únicamente me haría falta instalar "lirc" para que funcione el control remoto y verificar que puedo escuchar las estacio...
Read more »

Installation of OpenWRT on Linksys EA4500 / N900 v1

Por Tuareg -
Imagen
Installation of OpenWRT on Linksys EA4500 / N900 1.-  It looks like this is very important and you must not skip it!!!! Download/install last oficial firmware by Linksys Ver. 2.1.42 (Build 183584) Latest Date:  9/19/2017 Download 22.6 MB From here: http://downloads.linksys.com/downloads/firmware/FW_EA4500_2.1.42.183584_prod.img Perform the "upgrade" 2.- After the reboot, perform the install of OpenWRT. I'm not sure but my attempts to install the very latest firmware failed, so I used the version mention on this chatroom: https://forum.archive.openwrt.org/viewtopic.php?id=60649&p=1#p304557 Post #21: Edit: that image you're running now might be old enough that you should flash the factory firmware first, then flash with https://downloads.openwrt.org/snapshots … actory.bin . The board name changed from ea4500 to linksys-viper, which will prevent sysupgrade from accepting the .tar image. Link to the file: https://downloads.openwrt.org/snapsh...
Read more »

HOWTO : Find IP and/or MAC address of Brocade switch

Por Tuareg -
Imagen
If you have to work with Brocade Switches and for some reason you need to find out the ip and/or the mac address of the network interface, you might have to use (at least) two options, depending on the model/firmware version. To find the IP: broc01:FID340:admin> ipaddrshow SWITCH Ethernet IP Address: 1.1.2.4 Ethernet Subnetmask: 255.255.240.0 Gateway IP Address: 1.1.2.1 DHCP: Off To find the MAC address (two options): broc01:FID340:admin> ifmodeshow eth0 but depending on the model/firmware version you might get this output: "This command is deprecated in Fabric OS v8.0.1. Please use command ethif." broc01:FID340:admin> ethif --show eth0 eth0 interface: Link mode: negotiated 100baseTx-FD, link ok MAC Address: 00:F8:72:90:56:36 eth0      Link encap:Ethernet  HWaddr 00:F8:72:90:56:36           inet addr:1.1.2.1  Bcast:1.1.2.255  Mask:255.255.2255.0           UP BROADCAST R...
Read more »