Espacio Mixto: Installing ansible on Windows 7 using Cygwin64

I had to try this, install ansible on Windows 7.

After reading some links I found two ways to accomplish this (it's a long post you can skip what is in italic).

1.- You have to follow the usual steps to install Cygwin, like explained here. The only difference is that I installed using drive D:\ instead of C:\ and didn't use the "alias" suggested there, instead I tried a script named "apt-cyg" which I found across different questions on stackofervlow but this one was useful:

For a more convenient installer, you may want to use apt-cyg as your package manager. Its syntax similar to apt-get, which is a plus. For this, follow the above steps and then use Cygwin Bash for the following steps

wget https://raw.githubusercontent.com/transcode-open/apt-cyg/master/apt-cyg
chmod +x apt-cyg
mv apt-cyg /usr/local/bin

Now that apt-cyg is installed. Here are few examples of installing some packages

apt-cyg install nano
apt-cyg install git
apt-cyg install ca-certificates

so this is how it looks like:

$ apt-cyg install curl cygwin32-gcc-g++ gcc-core gcc-g++ git libffi-devel nano openssl openssl-devel python-crypto python2 python2-devel python2-openssl python2-pip python2-setuptools tree make

Installing curl
--2018-08-23 12:45:11-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/curl/curl-7.59.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 321036 (314K) [application/x-xz]
Saving to: ‘curl-7.59.0-1.tar.xz’

curl-7.59.0-1.tar.xz 100%[==================================================================================>] 313.51K 738KB/s in 0.4s

2018-08-23 12:45:12 (738 KB/s) - ‘curl-7.59.0-1.tar.xz’ saved [321036/321036]

curl-7.59.0-1.tar.xz: OK
Unpacking...
Package curl requires the following packages, installing:
cygwin libcurl4 libmetalink3 libopenssl100 zlib0
Package cygwin is already installed, skipping
Installing libcurl4
--2018-08-23 12:45:15-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/curl/libcurl4/libcurl4-7.59.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 212384 (207K) [application/x-xz]
Saving to: ‘libcurl4-7.59.0-1.tar.xz’

libcurl4-7.59.0-1.tar.xz 100%[==================================================================================>] 207.41K 606KB/s in 0.3s

2018-08-23 12:45:16 (606 KB/s) - ‘libcurl4-7.59.0-1.tar.xz’ saved [212384/212384]

libcurl4-7.59.0-1.tar.xz: OK
Unpacking...
Package libcurl4 requires the following packages, installing:
ca-certificates cygwin libgssapi_krb5_2 libidn2_0 libnghttp2_14 libopenldap2_4_2 libopenssl100 libpsl5 libssh2_1 zlib0
Package ca-certificates is already installed, skipping
Package cygwin is already installed, skipping
Installing libgssapi_krb5_2
--2018-08-23 12:45:20-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/krb5/libgssapi_krb5_2/libgssapi_krb5_2-1.15.2-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 102828 (100K) [application/x-xz]
Saving to: ‘libgssapi_krb5_2-1.15.2-2.tar.xz’

libgssapi_krb5_2-1.15.2-2.tar.xz 100%[==================================================================================>] 100.42K 394KB/s in 0.3s

2018-08-23 12:45:21 (394 KB/s) - ‘libgssapi_krb5_2-1.15.2-2.tar.xz’ saved [102828/102828]

libgssapi_krb5_2-1.15.2-2.tar.xz: OK
Unpacking...
Package libgssapi_krb5_2 requires the following packages, installing:
cygwin libcom_err2 libintl8 libk5crypto3 libkrb5_3 libkrb5support0
Package cygwin is already installed, skipping
Installing libcom_err2
--2018-08-23 12:45:23-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/e2fsprogs/libcom_err2/libcom_err2-1.42.12-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 4092 (4.0K) [application/x-xz]
Saving to: ‘libcom_err2-1.42.12-2.tar.xz’

libcom_err2-1.42.12-2.tar.xz 100%[==================================================================================>] 4.00K --.-KB/s in 0s

2018-08-23 12:45:24 (79.1 MB/s) - ‘libcom_err2-1.42.12-2.tar.xz’ saved [4092/4092]

libcom_err2-1.42.12-2.tar.xz: OK
Unpacking...
Package libcom_err2 requires the following packages, installing:
cygwin libgcc1
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libintl8 is already installed, skipping
Installing libk5crypto3
--2018-08-23 12:45:27-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/krb5/libk5crypto3/libk5crypto3-1.15.2-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 73344 (72K) [application/x-xz]
Saving to: ‘libk5crypto3-1.15.2-2.tar.xz’

libk5crypto3-1.15.2-2.tar.xz 100%[==================================================================================>] 71.62K 426KB/s in 0.2s

2018-08-23 12:45:28 (426 KB/s) - ‘libk5crypto3-1.15.2-2.tar.xz’ saved [73344/73344]

libk5crypto3-1.15.2-2.tar.xz: OK
Unpacking...
Package libk5crypto3 requires the following packages, installing:
cygwin libintl8 libkrb5support0
Package cygwin is already installed, skipping
Package libintl8 is already installed, skipping
Installing libkrb5support0
--2018-08-23 12:45:31-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/krb5/libkrb5support0/libkrb5support0-1.15.2-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 14424 (14K) [application/x-xz]
Saving to: ‘libkrb5support0-1.15.2-2.tar.xz’

libkrb5support0-1.15.2-2.tar.xz 100%[==================================================================================>] 14.09K --.-KB/s in 0.07s

2018-08-23 12:45:31 (192 KB/s) - ‘libkrb5support0-1.15.2-2.tar.xz’ saved [14424/14424]

libkrb5support0-1.15.2-2.tar.xz: OK
Unpacking...
Package libkrb5support0 requires the following packages, installing:
cygwin libintl8
Package cygwin is already installed, skipping
Package libintl8 is already installed, skipping
Installing libkrb5_3
--2018-08-23 12:45:34-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/krb5/libkrb5_3/libkrb5_3-1.15.2-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 236076 (231K) [application/x-xz]
Saving to: ‘libkrb5_3-1.15.2-2.tar.xz’

libkrb5_3-1.15.2-2.tar.xz 100%[==================================================================================>] 230.54K 521KB/s in 0.4s

2018-08-23 12:45:35 (521 KB/s) - ‘libkrb5_3-1.15.2-2.tar.xz’ saved [236076/236076]

libkrb5_3-1.15.2-2.tar.xz: OK
Unpacking...
Package libkrb5_3 requires the following packages, installing:
cygwin libcom_err2 libintl8 libk5crypto3 libkrb5support0
Package cygwin is already installed, skipping
Package libcom_err2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libk5crypto3 is already installed, skipping
Package libkrb5support0 is already installed, skipping
Package libkrb5support0 is already installed, skipping
Package libidn2_0 is already installed, skipping
Installing libnghttp2_14
--2018-08-23 12:45:39-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/nghttp2/libnghttp2_14/libnghttp2_14-1.31.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 50960 (50K) [application/x-xz]
Saving to: ‘libnghttp2_14-1.31.0-1.tar.xz’

libnghttp2_14-1.31.0-1.tar.xz 100%[==================================================================================>] 49.77K 303KB/s in 0.2s

2018-08-23 12:45:40 (303 KB/s) - ‘libnghttp2_14-1.31.0-1.tar.xz’ saved [50960/50960]

libnghttp2_14-1.31.0-1.tar.xz: OK
Unpacking...
Package libnghttp2_14 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Installing libopenldap2_4_2
--2018-08-23 12:45:42-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/openldap/libopenldap2_4_2/libopenldap2_4_2-2.4.42-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 144820 (141K) [application/x-xz]
Saving to: ‘libopenldap2_4_2-2.4.42-1.tar.xz’

libopenldap2_4_2-2.4.42-1.tar.xz 100%[==================================================================================>] 141.43K 532KB/s in 0.3s

2018-08-23 12:45:44 (532 KB/s) - ‘libopenldap2_4_2-2.4.42-1.tar.xz’ saved [144820/144820]

libopenldap2_4_2-2.4.42-1.tar.xz: OK
Unpacking...
Package libopenldap2_4_2 requires the following packages, installing:
cygwin libopenssl100 libsasl2_3
Package cygwin is already installed, skipping
Package libopenssl100 is already installed, skipping
Installing libsasl2_3
--2018-08-23 12:45:46-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cyrus-sasl/libsasl2_3/libsasl2_3-2.1.26-11.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 131228 (128K) [application/x-xz]
Saving to: ‘libsasl2_3-2.1.26-11.tar.xz’

libsasl2_3-2.1.26-11.tar.xz 100%[==================================================================================>] 128.15K 505KB/s in 0.3s

2018-08-23 12:45:49 (505 KB/s) - ‘libsasl2_3-2.1.26-11.tar.xz’ saved [131228/131228]

libsasl2_3-2.1.26-11.tar.xz: OK
Unpacking...
Package libsasl2_3 requires the following packages, installing:
cygwin libcrypt0 libdb5.3 libgssapi_krb5_2 libkrb5_3 libopenldap2_4_2 libopenssl100
Package cygwin is already installed, skipping
Installing libcrypt0
--2018-08-23 12:45:52-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/crypt/libcrypt0/libcrypt0-2.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 20804 (20K) [application/x-xz]
Saving to: ‘libcrypt0-2.1-1.tar.xz’

libcrypt0-2.1-1.tar.xz 100%[==================================================================================>] 20.32K --.-KB/s in 0.08s

2018-08-23 12:45:53 (245 KB/s) - ‘libcrypt0-2.1-1.tar.xz’ saved [20804/20804]

libcrypt0-2.1-1.tar.xz: OK
Unpacking...
Package libcrypt0 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Installing libdb5.3
--2018-08-23 12:45:55-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/db/libdb5.3/libdb5.3-5.3.28-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 883388 (863K) [application/x-xz]
Saving to: ‘libdb5.3-5.3.28-2.tar.xz’

libdb5.3-5.3.28-2.tar.xz 100%[==================================================================================>] 862.68K 1.09MB/s in 0.8s

2018-08-23 12:45:57 (1.09 MB/s) - ‘libdb5.3-5.3.28-2.tar.xz’ saved [883388/883388]

libdb5.3-5.3.28-2.tar.xz: OK
Unpacking...
Package libdb5.3 requires the following packages, installing:
cygwin libgcc1 libstdc++6
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libstdc++6 is already installed, skipping
Package libgssapi_krb5_2 is already installed, skipping
Package libkrb5_3 is already installed, skipping
Package libopenldap2_4_2 is already installed, skipping
Package libopenssl100 is already installed, skipping
Package libopenssl100 is already installed, skipping
Package libpsl5 is already installed, skipping
Installing libssh2_1
--2018-08-23 12:46:00-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libssh2/libssh2_1/libssh2_1-1.7.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 114940 (112K) [application/x-xz]
Saving to: ‘libssh2_1-1.7.0-1.tar.xz’

libssh2_1-1.7.0-1.tar.xz 100%[==================================================================================>] 112.25K 445KB/s in 0.3s

2018-08-23 12:46:01 (445 KB/s) - ‘libssh2_1-1.7.0-1.tar.xz’ saved [114940/114940]

libssh2_1-1.7.0-1.tar.xz: OK
Unpacking...
Package libssh2_1 requires the following packages, installing:
cygwin libopenssl100 zlib0
Package cygwin is already installed, skipping
Package libopenssl100 is already installed, skipping
Package zlib0 is already installed, skipping
Package zlib0 is already installed, skipping
Installing libmetalink3
--2018-08-23 12:46:04-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libmetalink/libmetalink3/libmetalink3-0.1.2-1.tar.bz2
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 17435 (17K) [application/x-bzip2]
Saving to: ‘libmetalink3-0.1.2-1.tar.bz2’

libmetalink3-0.1.2-1.tar.bz2 100%[==================================================================================>] 17.03K 38.2KB/s in 0.4s

2018-08-23 12:46:05 (38.2 KB/s) - ‘libmetalink3-0.1.2-1.tar.bz2’ saved [17435/17435]

libmetalink3-0.1.2-1.tar.bz2: OK
Unpacking...
Package libmetalink3 requires the following packages, installing:
cygwin libexpat1
Package cygwin is already installed, skipping
Installing libexpat1
--2018-08-23 12:46:07-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/expat/libexpat1/libexpat1-2.2.3-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 48980 (48K) [application/x-xz]
Saving to: ‘libexpat1-2.2.3-1.tar.xz’

libexpat1-2.2.3-1.tar.xz 100%[==================================================================================>] 47.83K 274KB/s in 0.2s

2018-08-23 12:46:08 (274 KB/s) - ‘libexpat1-2.2.3-1.tar.xz’ saved [48980/48980]

libexpat1-2.2.3-1.tar.xz: OK
Unpacking...
Package libexpat1 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package libopenssl100 is already installed, skipping
Package zlib0 is already installed, skipping
Running /etc/postinstall/libsasl2_3.sh
Running /etc/postinstall/zp_man-db.sh
Package curl installed

Installing cygwin32-gcc-g++
--2018-08-23 12:46:10-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-gcc/cygwin32-gcc-g++/cygwin32-gcc-g++-6.4.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 10706500 (10M) [application/x-xz]
Saving to: ‘cygwin32-gcc-g++-6.4.0-1.tar.xz’

cygwin32-gcc-g++-6.4.0-1.tar.xz 100%[==================================================================================>] 10.21M 2.87MB/s in 3.9s

2018-08-23 12:46:14 (2.59 MB/s) - ‘cygwin32-gcc-g++-6.4.0-1.tar.xz’ saved [10706500/10706500]

cygwin32-gcc-g++-6.4.0-1.tar.xz: OK
Unpacking...
Package cygwin32-gcc-g++ requires the following packages, installing:
cygwin cygwin32-gcc-core libgmp10 libiconv2 libintl8 libisl13 libisl15 libmpc3 libmpfr4 libmpfr6 zlib0
Package cygwin is already installed, skipping
Installing cygwin32-gcc-core
--2018-08-23 12:46:24-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-gcc/cygwin32-gcc-core/cygwin32-gcc-core-6.4.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 16858932 (16M) [application/x-xz]
Saving to: ‘cygwin32-gcc-core-6.4.0-1.tar.xz’

cygwin32-gcc-core-6.4.0-1.tar.xz 100%[==================================================================================>] 16.08M 4.31MB/s in 4.7s

2018-08-23 12:46:30 (3.42 MB/s) - ‘cygwin32-gcc-core-6.4.0-1.tar.xz’ saved [16858932/16858932]

cygwin32-gcc-core-6.4.0-1.tar.xz: OK
Unpacking...
Package cygwin32-gcc-core requires the following packages, installing:
bash cygwin cygwin32 cygwin32-binutils cygwin32-default-manifest cygwin32-gcc-g++ cygwin32-w32api-runtime libgcc1 libgmp10 libiconv2 libintl8 libisl13 libisl15 libmpc3 libmpfr4 libmpfr6 zlib0
Package bash is already installed, skipping
Package cygwin is already installed, skipping
Installing cygwin32
--2018-08-23 12:46:37-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32/cygwin32-2.10.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1261940 (1.2M) [application/x-xz]
Saving to: ‘cygwin32-2.10.0-1.tar.xz’

cygwin32-2.10.0-1.tar.xz 100%[==================================================================================>] 1.20M 1.73MB/s in 0.7s

2018-08-23 12:46:43 (1.73 MB/s) - ‘cygwin32-2.10.0-1.tar.xz’ saved [1261940/1261940]

cygwin32-2.10.0-1.tar.xz: OK
Unpacking...
Installing cygwin32-binutils
--2018-08-23 12:46:47-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-binutils/cygwin32-binutils-2.29-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 3312220 (3.2M) [application/x-xz]
Saving to: ‘cygwin32-binutils-2.29-1.tar.xz’

cygwin32-binutils-2.29-1.tar.xz 100%[==================================================================================>] 3.16M 819KB/s in 5.9s

2018-08-23 12:46:59 (550 KB/s) - ‘cygwin32-binutils-2.29-1.tar.xz’ saved [3312220/3312220]

cygwin32-binutils-2.29-1.tar.xz: OK
Unpacking...
Package cygwin32-binutils requires the following packages, installing:
cygwin libintl8 zlib0
Package cygwin is already installed, skipping
Package libintl8 is already installed, skipping
Package zlib0 is already installed, skipping
Installing cygwin32-default-manifest
--2018-08-23 12:47:05-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-default-manifest/cygwin32-default-manifest-6.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1292 (1.3K) [application/x-xz]
Saving to: ‘cygwin32-default-manifest-6.4-1.tar.xz’

cygwin32-default-manifest-6.4-1.tar.xz 100%[==================================================================================>] 1.26K --.-KB/s in 0s

2018-08-23 12:47:06 (8.02 MB/s) - ‘cygwin32-default-manifest-6.4-1.tar.xz’ saved [1292/1292]

cygwin32-default-manifest-6.4-1.tar.xz: OK
Unpacking...
Package cygwin32-gcc-g++ is already installed, skipping
Installing cygwin32-w32api-runtime
--2018-08-23 12:47:08-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-w32api-runtime/cygwin32-w32api-runtime-4.0.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1052164 (1.0M) [application/x-xz]
Saving to: ‘cygwin32-w32api-runtime-4.0.4-1.tar.xz’

cygwin32-w32api-runtime-4.0.4-1.tar.xz 100%[==================================================================================>] 1.00M 1001KB/s in 1.0s

2018-08-23 12:47:10 (1001 KB/s) - ‘cygwin32-w32api-runtime-4.0.4-1.tar.xz’ saved [1052164/1052164]

cygwin32-w32api-runtime-4.0.4-1.tar.xz: OK
Unpacking...
Package cygwin32-w32api-runtime requires the following packages, installing:
cygwin32-w32api-headers
Installing cygwin32-w32api-headers
--2018-08-23 12:47:15-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin32-w32api-headers/cygwin32-w32api-headers-4.0.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 4520860 (4.3M) [application/x-xz]
Saving to: ‘cygwin32-w32api-headers-4.0.4-1.tar.xz’

cygwin32-w32api-headers-4.0.4-1.tar.xz 100%[==================================================================================>] 4.31M 1.72MB/s in 2.5s

2018-08-23 12:47:19 (1.72 MB/s) - ‘cygwin32-w32api-headers-4.0.4-1.tar.xz’ saved [4520860/4520860]

cygwin32-w32api-headers-4.0.4-1.tar.xz: OK
Unpacking...
Package libgcc1 is already installed, skipping
Package libgmp10 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Installing libisl13
--2018-08-23 12:47:32-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/isl/libisl13/libisl13-0.14.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 375052 (366K) [application/x-xz]
Saving to: ‘libisl13-0.14.1-1.tar.xz’

libisl13-0.14.1-1.tar.xz 100%[==================================================================================>] 366.26K 730KB/s in 0.5s

2018-08-23 12:47:33 (730 KB/s) - ‘libisl13-0.14.1-1.tar.xz’ saved [375052/375052]

libisl13-0.14.1-1.tar.xz: OK
Unpacking...
Package libisl13 requires the following packages, installing:
cygwin libgmp10
Package cygwin is already installed, skipping
Package libgmp10 is already installed, skipping
Installing libisl15
--2018-08-23 12:47:36-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/isl/libisl15/libisl15-0.16.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 451468 (441K) [application/x-xz]
Saving to: ‘libisl15-0.16.1-1.tar.xz’

libisl15-0.16.1-1.tar.xz 100%[==================================================================================>] 440.89K 748KB/s in 0.6s

2018-08-23 12:47:37 (748 KB/s) - ‘libisl15-0.16.1-1.tar.xz’ saved [451468/451468]

libisl15-0.16.1-1.tar.xz: OK
Unpacking...
Package libisl15 requires the following packages, installing:
cygwin libgmp10
Package cygwin is already installed, skipping
Package libgmp10 is already installed, skipping
Installing libmpc3
--2018-08-23 12:47:40-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/mpclib/libmpc3/libmpc3-1.1.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 36120 (35K) [application/x-xz]
Saving to: ‘libmpc3-1.1.0-1.tar.xz’

libmpc3-1.1.0-1.tar.xz 100%[==================================================================================>] 35.27K --.-KB/s in 0.08s

2018-08-23 12:47:41 (418 KB/s) - ‘libmpc3-1.1.0-1.tar.xz’ saved [36120/36120]

libmpc3-1.1.0-1.tar.xz: OK
Unpacking...
Package libmpc3 requires the following packages, installing:
cygwin libgmp10 libmpfr4 libmpfr6
Package cygwin is already installed, skipping
Package libgmp10 is already installed, skipping
Installing libmpfr4
--2018-08-23 12:47:43-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/mpfr/libmpfr4/libmpfr4-3.1.6-1p1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 146032 (143K) [application/x-xz]
Saving to: ‘libmpfr4-3.1.6-1p1.tar.xz’

libmpfr4-3.1.6-1p1.tar.xz 100%[==================================================================================>] 142.61K 558KB/s in 0.3s

2018-08-23 12:47:44 (558 KB/s) - ‘libmpfr4-3.1.6-1p1.tar.xz’ saved [146032/146032]

libmpfr4-3.1.6-1p1.tar.xz: OK
Unpacking...
Package libmpfr4 requires the following packages, installing:
cygwin libgcc1 libgmp10
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgmp10 is already installed, skipping
Package libmpfr6 is already installed, skipping
Package libmpfr4 is already installed, skipping
Package libmpfr6 is already installed, skipping
Package zlib0 is already installed, skipping
Package libgmp10 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libisl13 is already installed, skipping
Package libisl15 is already installed, skipping
Package libmpc3 is already installed, skipping
Package libmpfr4 is already installed, skipping
Package libmpfr6 is already installed, skipping
Package zlib0 is already installed, skipping
Package cygwin32-gcc-g++ installed

Installing gcc-core
--2018-08-23 12:47:47-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/gcc-core/gcc-core-7.3.0-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 19156388 (18M) [application/x-xz]
Saving to: ‘gcc-core-7.3.0-3.tar.xz’

gcc-core-7.3.0-3.tar.xz 100%[==================================================================================>] 18.27M 3.49MB/s in 6.2s

2018-08-23 12:47:54 (2.94 MB/s) - ‘gcc-core-7.3.0-3.tar.xz’ saved [19156388/19156388]

gcc-core-7.3.0-3.tar.xz: OK
Unpacking...
Package gcc-core requires the following packages, installing:
bash binutils cygwin cygwin-devel libatomic1 libgcc1 libgmp10 libgomp1 libiconv2 libintl8 libisl15 libmpc3 libmpfr4 libmpfr6 libquadmath0 w32api-headers w32api-runtime windows-default-manifest zlib0
Package bash is already installed, skipping
Installing binutils
--2018-08-23 12:48:02-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/binutils/binutils-2.29-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 5863216 (5.6M) [application/x-xz]
Saving to: ‘binutils-2.29-1.tar.xz’

binutils-2.29-1.tar.xz 100%[==================================================================================>] 5.59M 2.96MB/s in 1.9s

2018-08-23 12:48:06 (2.96 MB/s) - ‘binutils-2.29-1.tar.xz’ saved [5863216/5863216]

binutils-2.29-1.tar.xz: OK
Unpacking...
Package binutils requires the following packages, installing:
cygwin libintl8 zlib0
Package cygwin is already installed, skipping
Package libintl8 is already installed, skipping
Package zlib0 is already installed, skipping
Package cygwin is already installed, skipping
Installing cygwin-devel
--2018-08-23 12:48:12-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygwin/cygwin-devel/cygwin-devel-2.10.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 321892 (314K) [application/x-xz]
Saving to: ‘cygwin-devel-2.10.0-1.tar.xz’

cygwin-devel-2.10.0-1.tar.xz 100%[==================================================================================>] 314.35K 37.1KB/s in 8.5s

2018-08-23 12:48:26 (37.1 KB/s) - ‘cygwin-devel-2.10.0-1.tar.xz’ saved [321892/321892]

cygwin-devel-2.10.0-1.tar.xz: OK
Unpacking...
Installing libatomic1
--2018-08-23 12:48:30-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/libatomic1/libatomic1-7.3.0-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 6336 (6.2K) [application/x-xz]
Saving to: ‘libatomic1-7.3.0-3.tar.xz’

libatomic1-7.3.0-3.tar.xz 100%[==================================================================================>] 6.19K --.-KB/s in 0s

2018-08-23 12:48:31 (44.8 MB/s) - ‘libatomic1-7.3.0-3.tar.xz’ saved [6336/6336]

libatomic1-7.3.0-3.tar.xz: OK
Unpacking...
Package libatomic1 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgmp10 is already installed, skipping
Installing libgomp1
--2018-08-23 12:48:34-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/libgomp1/libgomp1-7.3.0-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 58936 (58K) [application/x-xz]
Saving to: ‘libgomp1-7.3.0-3.tar.xz’

libgomp1-7.3.0-3.tar.xz 100%[==================================================================================>] 57.55K 343KB/s in 0.2s

2018-08-23 12:48:35 (343 KB/s) - ‘libgomp1-7.3.0-3.tar.xz’ saved [58936/58936]

libgomp1-7.3.0-3.tar.xz: OK
Unpacking...
Package libgomp1 requires the following packages, installing:
cygwin libgcc1
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libisl15 is already installed, skipping
Package libmpc3 is already installed, skipping
Package libmpfr4 is already installed, skipping
Package libmpfr6 is already installed, skipping
Installing libquadmath0
--2018-08-23 12:48:38-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/libquadmath0/libquadmath0-7.3.0-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 133304 (130K) [application/x-xz]
Saving to: ‘libquadmath0-7.3.0-3.tar.xz’

libquadmath0-7.3.0-3.tar.xz 100%[==================================================================================>] 130.18K 519KB/s in 0.3s

2018-08-23 12:48:39 (519 KB/s) - ‘libquadmath0-7.3.0-3.tar.xz’ saved [133304/133304]

libquadmath0-7.3.0-3.tar.xz: OK
Unpacking...
Package libquadmath0 requires the following packages, installing:
cygwin libgcc1
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Installing w32api-headers
--2018-08-23 12:48:42-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/w32api-headers/w32api-headers-5.0.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 4662244 (4.4M) [application/x-xz]
Saving to: ‘w32api-headers-5.0.4-1.tar.xz’

w32api-headers-5.0.4-1.tar.xz 100%[==================================================================================>] 4.45M 2.75MB/s in 1.6s

2018-08-23 12:48:45 (2.75 MB/s) - ‘w32api-headers-5.0.4-1.tar.xz’ saved [4662244/4662244]

w32api-headers-5.0.4-1.tar.xz: OK
Unpacking...
Installing w32api-runtime
--2018-08-23 12:48:59-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/w32api-runtime/w32api-runtime-5.0.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 2057720 (2.0M) [application/x-xz]
Saving to: ‘w32api-runtime-5.0.4-1.tar.xz’

w32api-runtime-5.0.4-1.tar.xz 100%[==================================================================================>] 1.96M 1.63MB/s in 1.2s

2018-08-23 12:49:01 (1.63 MB/s) - ‘w32api-runtime-5.0.4-1.tar.xz’ saved [2057720/2057720]

w32api-runtime-5.0.4-1.tar.xz: OK
Unpacking...
Package w32api-runtime requires the following packages, installing:
w32api-headers
Package w32api-headers is already installed, skipping
Installing windows-default-manifest
--2018-08-23 12:49:12-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/windows-default-manifest/windows-default-manifest-6.4-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1244 (1.2K) [application/x-xz]
Saving to: ‘windows-default-manifest-6.4-1.tar.xz’

windows-default-manifest-6.4-1.tar.xz 100%[==================================================================================>] 1.21K --.-KB/s in 0s

2018-08-23 12:49:12 (7.87 MB/s) - ‘windows-default-manifest-6.4-1.tar.xz’ saved [1244/1244]

windows-default-manifest-6.4-1.tar.xz: OK
Unpacking...
Package zlib0 is already installed, skipping
Package gcc-core installed

Installing gcc-g++
--2018-08-23 12:49:14-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/gcc-g++/gcc-g++-7.3.0-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 12379576 (12M) [application/x-xz]
Saving to: ‘gcc-g++-7.3.0-3.tar.xz’

gcc-g++-7.3.0-3.tar.xz 100%[==================================================================================>] 11.81M 3.61MB/s in 3.4s

2018-08-23 12:49:18 (3.44 MB/s) - ‘gcc-g++-7.3.0-3.tar.xz’ saved [12379576/12379576]

gcc-g++-7.3.0-3.tar.xz: OK
Unpacking...
Package gcc-g++ requires the following packages, installing:
cygwin gcc-core libgmp10 libiconv2 libintl8 libisl15 libmpc3 libmpfr4 libmpfr6 libstdc++6 zlib0
Package cygwin is already installed, skipping
Package gcc-core is already installed, skipping
Package libgmp10 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libisl15 is already installed, skipping
Package libmpc3 is already installed, skipping
Package libmpfr4 is already installed, skipping
Package libmpfr6 is already installed, skipping
Package libstdc++6 is already installed, skipping
Package zlib0 is already installed, skipping
Package gcc-g++ installed

Installing git
--2018-08-23 12:49:28-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/git/git-2.17.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 6127280 (5.8M) [application/x-xz]
Saving to: ‘git-2.17.0-1.tar.xz’

git-2.17.0-1.tar.xz 100%[==================================================================================>] 5.84M 3.39MB/s in 1.7s

2018-08-23 12:49:30 (3.39 MB/s) - ‘git-2.17.0-1.tar.xz’ saved [6127280/6127280]

git-2.17.0-1.tar.xz: OK
Unpacking...
Package git requires the following packages, installing:
bash cygutils cygwin less libcurl4 libexpat1 libiconv2 libintl8 libopenssl100 libpcre1 openssh perl-Error perl-Scalar-List-Utils perl-TermReadKey perl_base rsync zlib0
Package bash is already installed, skipping
Package cygutils is already installed, skipping
Package cygwin is already installed, skipping
Package less is already installed, skipping
Package libcurl4 is already installed, skipping
Package libexpat1 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libopenssl100 is already installed, skipping
Package libpcre1 is already installed, skipping
Installing openssh
--2018-08-23 12:49:42-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/openssh/openssh-7.7p1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 767092 (749K) [application/x-xz]
Saving to: ‘openssh-7.7p1-1.tar.xz’

openssh-7.7p1-1.tar.xz 100%[==================================================================================>] 749.11K 1.23MB/s in 0.6s

2018-08-23 12:49:45 (1.23 MB/s) - ‘openssh-7.7p1-1.tar.xz’ saved [767092/767092]

openssh-7.7p1-1.tar.xz: OK
Unpacking...
Package openssh requires the following packages, installing:
bash csih cygrunsrv cygwin diffutils libcrypt0 libedit0 libgcc1 libgssapi_krb5_2 libkrb5_3 libopenssl100 libssp0 zlib0
Package bash is already installed, skipping
Installing csih
--2018-08-23 12:49:49-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/csih/csih-0.9.11-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 298344 (291K) [application/x-xz]
Saving to: ‘csih-0.9.11-1.tar.xz’

csih-0.9.11-1.tar.xz 100%[==================================================================================>] 291.35K 680KB/s in 0.4s

2018-08-23 12:49:50 (680 KB/s) - ‘csih-0.9.11-1.tar.xz’ saved [298344/298344]

csih-0.9.11-1.tar.xz: OK
Unpacking...
Package csih requires the following packages, installing:
bash coreutils diffutils editrights gawk grep sed
Package bash is already installed, skipping
Package coreutils is already installed, skipping
Package diffutils is already installed, skipping
Package editrights is already installed, skipping
Package gawk is already installed, skipping
Package grep is already installed, skipping
Package sed is already installed, skipping
Installing cygrunsrv
--2018-08-23 12:49:53-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/cygrunsrv/cygrunsrv-1.62-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 63280 (62K) [application/x-xz]
Saving to: ‘cygrunsrv-1.62-1.tar.xz’

cygrunsrv-1.62-1.tar.xz 100%[==================================================================================>] 61.80K 368KB/s in 0.2s

2018-08-23 12:49:54 (368 KB/s) - ‘cygrunsrv-1.62-1.tar.xz’ saved [63280/63280]

cygrunsrv-1.62-1.tar.xz: OK
Unpacking...
Package cygrunsrv requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package cygwin is already installed, skipping
Package diffutils is already installed, skipping
Package libcrypt0 is already installed, skipping
Installing libedit0
--2018-08-23 12:49:57-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libedit/libedit0/libedit0-20130712-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 70572 (69K) [application/x-xz]
Saving to: ‘libedit0-20130712-1.tar.xz’

libedit0-20130712-1.tar.xz 100%[==================================================================================>] 68.92K 410KB/s in 0.2s

2018-08-23 12:49:58 (410 KB/s) - ‘libedit0-20130712-1.tar.xz’ saved [70572/70572]

libedit0-20130712-1.tar.xz: OK
Unpacking...
Package libedit0 requires the following packages, installing:
cygwin libncursesw10
Package cygwin is already installed, skipping
Package libncursesw10 is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgssapi_krb5_2 is already installed, skipping
Package libkrb5_3 is already installed, skipping
Package libopenssl100 is already installed, skipping
Installing libssp0
--2018-08-23 12:50:01-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gcc/libssp0/libssp0-6.4.0-4.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 3568 (3.5K) [application/x-xz]
Saving to: ‘libssp0-6.4.0-4.tar.xz’

libssp0-6.4.0-4.tar.xz 100%[==================================================================================>] 3.48K --.-KB/s in 0s

2018-08-23 12:50:02 (21.4 MB/s) - ‘libssp0-6.4.0-4.tar.xz’ saved [3568/3568]

libssp0-6.4.0-4.tar.xz: OK
Unpacking...
Package libssp0 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package zlib0 is already installed, skipping
Installing perl-Error
--2018-08-23 12:50:05-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/perl-Error/perl-Error-0.17026-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 34056 (33K) [application/x-xz]
Saving to: ‘perl-Error-0.17026-1.tar.xz’

perl-Error-0.17026-1.tar.xz 100%[==================================================================================>] 33.26K --.-KB/s in 0.08s

2018-08-23 12:50:05 (398 KB/s) - ‘perl-Error-0.17026-1.tar.xz’ saved [34056/34056]

perl-Error-0.17026-1.tar.xz: OK
Unpacking...
Package perl-Error requires the following packages, installing:
perl_base
Installing perl_base
--2018-08-23 12:50:08-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/perl/perl_base/perl_base-5.26.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 3054016 (2.9M) [application/x-xz]
Saving to: ‘perl_base-5.26.2-1.tar.xz’

perl_base-5.26.2-1.tar.xz 100%[==================================================================================>] 2.91M 2.46MB/s in 1.2s

2018-08-23 12:50:10 (2.46 MB/s) - ‘perl_base-5.26.2-1.tar.xz’ saved [3054016/3054016]

perl_base-5.26.2-1.tar.xz: OK
Unpacking...
Package perl_base requires the following packages, installing:
cygwin libcrypt0 libssp0 perl
Package cygwin is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libssp0 is already installed, skipping
Installing perl
--2018-08-23 12:50:16-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/perl/perl-5.26.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 3728028 (3.6M) [application/x-xz]
Saving to: ‘perl-5.26.2-1.tar.xz’

perl-5.26.2-1.tar.xz 100%[==================================================================================>] 3.55M 2.62MB/s in 1.4s

2018-08-23 12:50:19 (2.62 MB/s) - ‘perl-5.26.2-1.tar.xz’ saved [3728028/3728028]

perl-5.26.2-1.tar.xz: OK
Unpacking...
Package perl requires the following packages, installing:
cygwin libcrypt0 libdb5.3 libgdbm4 libssp0 perl_autorebase perl_base
Package cygwin is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libdb5.3 is already installed, skipping
Package libgdbm4 is already installed, skipping
Package libssp0 is already installed, skipping
Installing perl_autorebase
--2018-08-23 12:50:30-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/perl/perl_autorebase/perl_autorebase-5.26.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 268 [application/x-xz]
Saving to: ‘perl_autorebase-5.26.2-1.tar.xz’

perl_autorebase-5.26.2-1.tar.xz 100%[==================================================================================>] 268 --.-KB/s in 0s

2018-08-23 12:50:31 (1.71 MB/s) - ‘perl_autorebase-5.26.2-1.tar.xz’ saved [268/268]

perl_autorebase-5.26.2-1.tar.xz: OK
Unpacking...
Package perl_base is already installed, skipping
Installing perl-Scalar-List-Utils
--2018-08-23 12:50:33-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/perl-Scalar-List-Utils/perl-Scalar-List-Utils-1.50-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 50164 (49K) [application/x-xz]
Saving to: ‘perl-Scalar-List-Utils-1.50-1.tar.xz’

perl-Scalar-List-Utils-1.50-1.tar.xz 100%[==================================================================================>] 48.99K 298KB/s in 0.2s

2018-08-23 12:50:34 (298 KB/s) - ‘perl-Scalar-List-Utils-1.50-1.tar.xz’ saved [50164/50164]

perl-Scalar-List-Utils-1.50-1.tar.xz: OK
Unpacking...
Package perl-Scalar-List-Utils requires the following packages, installing:
cygwin libssp0 perl perl_base
Package cygwin is already installed, skipping
Package libssp0 is already installed, skipping
Package perl is already installed, skipping
Package perl_base is already installed, skipping
Installing perl-TermReadKey
--2018-08-23 12:50:37-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/perl-TermReadKey/perl-TermReadKey-2.37-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 20788 (20K) [application/x-xz]
Saving to: ‘perl-TermReadKey-2.37-2.tar.xz’

perl-TermReadKey-2.37-2.tar.xz 100%[==================================================================================>] 20.30K --.-KB/s in 0.08s

2018-08-23 12:50:38 (243 KB/s) - ‘perl-TermReadKey-2.37-2.tar.xz’ saved [20788/20788]

perl-TermReadKey-2.37-2.tar.xz: OK
Unpacking...
Package perl-TermReadKey requires the following packages, installing:
cygwin libssp0 perl_base
Package cygwin is already installed, skipping
Package libssp0 is already installed, skipping
Package perl_base is already installed, skipping
Package perl_base is already installed, skipping
Installing rsync
--2018-08-23 12:50:41-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/rsync/rsync-3.1.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 658072 (643K) [application/x-xz]
Saving to: ‘rsync-3.1.2-1.tar.xz’

rsync-3.1.2-1.tar.xz 100%[==================================================================================>] 642.65K 830KB/s in 0.8s

2018-08-23 12:50:43 (830 KB/s) - ‘rsync-3.1.2-1.tar.xz’ saved [658072/658072]

rsync-3.1.2-1.tar.xz: OK
Unpacking...
Package rsync requires the following packages, installing:
cygwin libiconv2
Package cygwin is already installed, skipping
Package libiconv2 is already installed, skipping
Package zlib0 is already installed, skipping
Running /etc/postinstall/openssh.sh
Package git installed

Installing libffi-devel
--2018-08-23 12:50:45-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libffi/libffi-devel/libffi-devel-3.2.1-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 16932 (17K) [application/x-xz]
Saving to: ‘libffi-devel-3.2.1-2.tar.xz’

libffi-devel-3.2.1-2.tar.xz 100%[==================================================================================>] 16.54K --.-KB/s in 0.08s

2018-08-23 12:50:46 (201 KB/s) - ‘libffi-devel-3.2.1-2.tar.xz’ saved [16932/16932]

libffi-devel-3.2.1-2.tar.xz: OK
Unpacking...
Package libffi-devel requires the following packages, installing:
libffi6
Package libffi6 is already installed, skipping
Package libffi-devel installed

Installing nano
--2018-08-23 12:50:48-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/nano/nano-2.9.7-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 536256 (524K) [application/x-xz]
Saving to: ‘nano-2.9.7-1.tar.xz’

nano-2.9.7-1.tar.xz 100%[==================================================================================>] 523.69K 776KB/s in 0.7s

2018-08-23 12:50:50 (776 KB/s) - ‘nano-2.9.7-1.tar.xz’ saved [536256/536256]

nano-2.9.7-1.tar.xz: OK
Unpacking...
Package nano requires the following packages, installing:
cygwin file libintl8 libncursesw10
Package cygwin is already installed, skipping
Package file is already installed, skipping
Package libintl8 is already installed, skipping
Package libncursesw10 is already installed, skipping
Package nano installed
Package openssl is already installed, skipping

Installing openssl-devel
--2018-08-23 12:50:53-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/openssl/openssl-devel/openssl-devel-1.0.2o-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 5115924 (4.9M) [application/x-xz]
Saving to: ‘openssl-devel-1.0.2o-1.tar.xz’

openssl-devel-1.0.2o-1.tar.xz 100%[==================================================================================>] 4.88M 1.68MB/s in 2.9s

2018-08-23 12:50:57 (1.68 MB/s) - ‘openssl-devel-1.0.2o-1.tar.xz’ saved [5115924/5115924]

openssl-devel-1.0.2o-1.tar.xz: OK
Unpacking...
Package openssl-devel requires the following packages, installing:
libopenssl100 pkg-config
Package libopenssl100 is already installed, skipping
Installing pkg-config
--2018-08-23 12:51:09-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/pkg-config/pkg-config-0.29.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 56536 (55K) [application/x-xz]
Saving to: ‘pkg-config-0.29.1-1.tar.xz’

pkg-config-0.29.1-1.tar.xz 100%[==================================================================================>] 55.21K 327KB/s in 0.2s

2018-08-23 12:51:10 (327 KB/s) - ‘pkg-config-0.29.1-1.tar.xz’ saved [56536/56536]

pkg-config-0.29.1-1.tar.xz: OK
Unpacking...
Package pkg-config requires the following packages, installing:
cygwin libglib2.0_0
Package cygwin is already installed, skipping
Installing libglib2.0_0
--2018-08-23 12:51:12-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/glib2.0/libglib2.0_0/libglib2.0_0-2.54.3-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 3044044 (2.9M) [application/x-xz]
Saving to: ‘libglib2.0_0-2.54.3-1.tar.xz’

libglib2.0_0-2.54.3-1.tar.xz 100%[==================================================================================>] 2.90M 1.59MB/s in 1.8s

2018-08-23 12:51:16 (1.59 MB/s) - ‘libglib2.0_0-2.54.3-1.tar.xz’ saved [3044044/3044044]

libglib2.0_0-2.54.3-1.tar.xz: OK
Unpacking...
Package libglib2.0_0 requires the following packages, installing:
cygwin desktop-file-utils gsettings-desktop-schemas libfam0 libffi6 libiconv2 libintl8 libpcre1 shared-mime-info tzdata zlib0
Package cygwin is already installed, skipping
Installing desktop-file-utils
--2018-08-23 12:51:20-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/desktop-file-utils/desktop-file-utils-0.23-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 73920 (72K) [application/x-xz]
Saving to: ‘desktop-file-utils-0.23-1.tar.xz’

desktop-file-utils-0.23-1.tar.xz 100%[==================================================================================>] 72.19K 435KB/s in 0.2s

2018-08-23 12:51:21 (435 KB/s) - ‘desktop-file-utils-0.23-1.tar.xz’ saved [73920/73920]

desktop-file-utils-0.23-1.tar.xz: OK
Unpacking...
Package desktop-file-utils requires the following packages, installing:
cygwin libglib2.0_0 libintl8
Package cygwin is already installed, skipping
Package libglib2.0_0 is already installed, skipping
Package libintl8 is already installed, skipping
Installing gsettings-desktop-schemas
--2018-08-23 12:51:24-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/gsettings-desktop-schemas/gsettings-desktop-schemas-3.24.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 502752 (491K) [application/x-xz]
Saving to: ‘gsettings-desktop-schemas-3.24.1-1.tar.xz’

gsettings-desktop-schemas-3.24.1-1.tar.x 100%[==================================================================================>] 490.97K 819KB/s in 0.6s

2018-08-23 12:51:26 (819 KB/s) - ‘gsettings-desktop-schemas-3.24.1-1.tar.xz’ saved [502752/502752]

gsettings-desktop-schemas-3.24.1-1.tar.xz: OK
Unpacking...
Package gsettings-desktop-schemas requires the following packages, installing:
libglib2.0_0 pkg-config
Package libglib2.0_0 is already installed, skipping
Package pkg-config is already installed, skipping
Installing libfam0
--2018-08-23 12:51:29-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gamin/libfam0/libfam0-0.1.10-15.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 11592 (11K) [application/x-xz]
Saving to: ‘libfam0-0.1.10-15.tar.xz’

libfam0-0.1.10-15.tar.xz 100%[==================================================================================>] 11.32K --.-KB/s in 0s

2018-08-23 12:51:30 (31.8 MB/s) - ‘libfam0-0.1.10-15.tar.xz’ saved [11592/11592]

libfam0-0.1.10-15.tar.xz: OK
Unpacking...
Package libfam0 requires the following packages, installing:
cygwin gamin
Package cygwin is already installed, skipping
Installing gamin
--2018-08-23 12:51:32-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/gamin/gamin-0.1.10-15.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 52608 (51K) [application/x-xz]
Saving to: ‘gamin-0.1.10-15.tar.xz’

gamin-0.1.10-15.tar.xz 100%[==================================================================================>] 51.38K 308KB/s in 0.2s

2018-08-23 12:51:33 (308 KB/s) - ‘gamin-0.1.10-15.tar.xz’ saved [52608/52608]

gamin-0.1.10-15.tar.xz: OK
Unpacking...
Package gamin requires the following packages, installing:
cygwin libglib2.0_0
Package cygwin is already installed, skipping
Package libglib2.0_0 is already installed, skipping
Package libffi6 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libpcre1 is already installed, skipping
Installing shared-mime-info
--2018-08-23 12:51:36-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/shared-mime-info/shared-mime-info-1.8-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 303688 (297K) [application/x-xz]
Saving to: ‘shared-mime-info-1.8-1.tar.xz’

shared-mime-info-1.8-1.tar.xz 100%[==================================================================================>] 296.57K 679KB/s in 0.4s

2018-08-23 12:51:38 (679 KB/s) - ‘shared-mime-info-1.8-1.tar.xz’ saved [303688/303688]

shared-mime-info-1.8-1.tar.xz: OK
Unpacking...
Package shared-mime-info requires the following packages, installing:
cygwin libglib2.0_0 libxml2
Package cygwin is already installed, skipping
Package libglib2.0_0 is already installed, skipping
Installing libxml2
--2018-08-23 12:51:40-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libxml2/libxml2-2.9.4-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 693532 (677K) [application/x-xz]
Saving to: ‘libxml2-2.9.4-2.tar.xz’

libxml2-2.9.4-2.tar.xz 100%[==================================================================================>] 677.28K 994KB/s in 0.7s

2018-08-23 12:51:42 (994 KB/s) - ‘libxml2-2.9.4-2.tar.xz’ saved [693532/693532]

libxml2-2.9.4-2.tar.xz: OK
Unpacking...
Package libxml2 requires the following packages, installing:
cygwin libiconv2 liblzma5 libreadline7 zlib0
Package cygwin is already installed, skipping
Package libiconv2 is already installed, skipping
Package liblzma5 is already installed, skipping
Package libreadline7 is already installed, skipping
Package zlib0 is already installed, skipping
Package tzdata is already installed, skipping
Package zlib0 is already installed, skipping
Running /etc/postinstall/libxml2.sh
Running /etc/postinstall/zp_desktop-file-utils.sh
Running /etc/postinstall/zp_glib2.0.sh
Warning: Schema “org.gnome.system.locale” has path “/system/locale/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Warning: Schema “org.gnome.system.proxy” has path “/system/proxy/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Warning: Schema “org.gnome.system.proxy.http” has path “/system/proxy/http/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Warning: Schema “org.gnome.system.proxy.https” has path “/system/proxy/https/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Warning: Schema “org.gnome.system.proxy.ftp” has path “/system/proxy/ftp/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Warning: Schema “org.gnome.system.proxy.socks” has path “/system/proxy/socks/”. Paths starting with “/apps/”, “/desktop/” or “/system/” are deprecated.
Running /etc/postinstall/zp_shared-mime-info.sh
Package openssl-devel installed

Installing python-crypto
--2018-08-23 12:51:53-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python-crypto/python-crypto-2.6-1.tar.bz2
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 558600 (546K) [application/x-bzip2]
Saving to: ‘python-crypto-2.6-1.tar.bz2’

python-crypto-2.6-1.tar.bz2 100%[==================================================================================>] 545.51K 502KB/s in 1.1s

2018-08-23 12:51:58 (502 KB/s) - ‘python-crypto-2.6-1.tar.bz2’ saved [558600/558600]

python-crypto-2.6-1.tar.bz2: OK
Unpacking...
Package python-crypto requires the following packages, installing:
cygwin libgmp10 python
Package cygwin is already installed, skipping
Package libgmp10 is already installed, skipping
Installing python
--2018-08-23 12:52:04-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python2/python/python-2.7.14-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 108 [application/x-xz]
Saving to: ‘python-2.7.14-1.tar.xz’

python-2.7.14-1.tar.xz 100%[==================================================================================>] 108 --.-KB/s in 0s

2018-08-23 12:52:04 (426 KB/s) - ‘python-2.7.14-1.tar.xz’ saved [108/108]

python-2.7.14-1.tar.xz: OK
Unpacking...
Package python requires the following packages, installing:
bash binutils cygwin cygwin-devel libbz2_1 libcrypt0 libdb5.3 libexpat1 libffi6 libgdbm4 libintl8 libncursesw10 libopenssl100 libreadline7 libsqlite3_0 libuuid-devel python2 zlib0
Package bash is already installed, skipping
Package binutils is already installed, skipping
Package cygwin is already installed, skipping
Package cygwin-devel is already installed, skipping
Package libbz2_1 is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libdb5.3 is already installed, skipping
Package libexpat1 is already installed, skipping
Package libffi6 is already installed, skipping
Package libgdbm4 is already installed, skipping
Package libintl8 is already installed, skipping
Package libncursesw10 is already installed, skipping
Package libopenssl100 is already installed, skipping
Package libreadline7 is already installed, skipping
Installing libsqlite3_0
--2018-08-23 12:52:07-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/sqlite3/libsqlite3_0/libsqlite3_0-3.21.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 476428 (465K) [application/x-xz]
Saving to: ‘libsqlite3_0-3.21.0-1.tar.xz’

libsqlite3_0-3.21.0-1.tar.xz 100%[==================================================================================>] 465.26K 790KB/s in 0.6s

2018-08-23 12:52:09 (790 KB/s) - ‘libsqlite3_0-3.21.0-1.tar.xz’ saved [476428/476428]

libsqlite3_0-3.21.0-1.tar.xz: OK
Unpacking...
Package libsqlite3_0 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Installing libuuid-devel
--2018-08-23 12:52:11-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/util-linux/libuuid-devel/libuuid-devel-2.25.2-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 16228 (16K) [application/x-xz]
Saving to: ‘libuuid-devel-2.25.2-2.tar.xz’

libuuid-devel-2.25.2-2.tar.xz 100%[==================================================================================>] 15.85K --.-KB/s in 0.08s

2018-08-23 12:52:12 (191 KB/s) - ‘libuuid-devel-2.25.2-2.tar.xz’ saved [16228/16228]

libuuid-devel-2.25.2-2.tar.xz: OK
Unpacking...
Package libuuid-devel requires the following packages, installing:
libuuid1
Package libuuid1 is already installed, skipping
Installing python2
--2018-08-23 12:52:14-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python2/python2-2.7.14-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 6028268 (5.7M) [application/x-xz]
Saving to: ‘python2-2.7.14-1.tar.xz’

python2-2.7.14-1.tar.xz 100%[==================================================================================>] 5.75M 2.13MB/s in 2.7s

2018-08-23 12:52:17 (2.13 MB/s) - ‘python2-2.7.14-1.tar.xz’ saved [6028268/6028268]

python2-2.7.14-1.tar.xz: OK
Unpacking...
Package python2 requires the following packages, installing:
bash binutils cygwin libbz2_1 libcrypt0 libdb5.3 libexpat1 libffi6 libgdbm4 libintl8 libncursesw10 libopenssl100 libreadline7 libsqlite3_0 libuuid-devel zlib0
Package bash is already installed, skipping
Package binutils is already installed, skipping
Package cygwin is already installed, skipping
Package libbz2_1 is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libdb5.3 is already installed, skipping
Package libexpat1 is already installed, skipping
Package libffi6 is already installed, skipping
Package libgdbm4 is already installed, skipping
Package libintl8 is already installed, skipping
Package libncursesw10 is already installed, skipping
Package libopenssl100 is already installed, skipping
Package libreadline7 is already installed, skipping
Package libsqlite3_0 is already installed, skipping
Package libuuid-devel is already installed, skipping
Package zlib0 is already installed, skipping
Package zlib0 is already installed, skipping
Package python-crypto installed
Package python2 is already installed, skipping

Installing python2-devel
--2018-08-23 12:52:35-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python2/python2-devel/python2-devel-2.7.14-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 140836 (138K) [application/x-xz]
Saving to: ‘python2-devel-2.7.14-1.tar.xz’

python2-devel-2.7.14-1.tar.xz 100%[==================================================================================>] 137.54K 539KB/s in 0.3s

2018-08-23 12:52:39 (539 KB/s) - ‘python2-devel-2.7.14-1.tar.xz’ saved [140836/140836]

python2-devel-2.7.14-1.tar.xz: OK
Unpacking...
Package python2-devel requires the following packages, installing:
bash pkg-config python2
Package bash is already installed, skipping
Package pkg-config is already installed, skipping
Package python2 is already installed, skipping
Package python2-devel installed

Installing python2-openssl
--2018-08-23 12:52:42-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-openssl/python2-openssl/python2-openssl-16.2.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 69480 (68K) [application/x-xz]
Saving to: ‘python2-openssl-16.2.0-1.tar.xz’

python2-openssl-16.2.0-1.tar.xz 100%[==================================================================================>] 67.85K 417KB/s in 0.2s

2018-08-23 12:52:43 (417 KB/s) - ‘python2-openssl-16.2.0-1.tar.xz’ saved [69480/69480]

python2-openssl-16.2.0-1.tar.xz: OK
Unpacking...
Package python2-openssl requires the following packages, installing:
python2 python2-cryptography python2-six
Package python2 is already installed, skipping
Installing python2-cryptography
--2018-08-23 12:52:46-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python-cryptography/python2-cryptography/python2-cryptography-1.8.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 290704 (284K) [application/x-xz]
Saving to: ‘python2-cryptography-1.8.1-1.tar.xz’

python2-cryptography-1.8.1-1.tar.xz 100%[==================================================================================>] 283.89K 664KB/s in 0.4s

2018-08-23 12:52:48 (664 KB/s) - ‘python2-cryptography-1.8.1-1.tar.xz’ saved [290704/290704]

python2-cryptography-1.8.1-1.tar.xz: OK
Unpacking...
Package python2-cryptography requires the following packages, installing:
cygwin libopenssl100 python2 python2-asn1crypto python2-cffi python2-enum34 python2-idna python2-ipaddress python2-packaging python2-six
Package cygwin is already installed, skipping
Package libopenssl100 is already installed, skipping
Package python2 is already installed, skipping
Installing python2-asn1crypto
--2018-08-23 12:52:54-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-asn1crypto/python2-asn1crypto/python2-asn1crypto-0.22.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 143560 (140K) [application/x-xz]
Saving to: ‘python2-asn1crypto-0.22.0-1.tar.xz’

python2-asn1crypto-0.22.0-1.tar.xz 100%[==================================================================================>] 140.20K 544KB/s in 0.3s

2018-08-23 12:52:56 (544 KB/s) - ‘python2-asn1crypto-0.22.0-1.tar.xz’ saved [143560/143560]

python2-asn1crypto-0.22.0-1.tar.xz: OK
Unpacking...
Package python2-asn1crypto requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-cffi
--2018-08-23 12:53:02-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python-cffi/python2-cffi/python2-cffi-1.9.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 183976 (180K) [application/x-xz]
Saving to: ‘python2-cffi-1.9.1-1.tar.xz’

python2-cffi-1.9.1-1.tar.xz 100%[==================================================================================>] 179.66K 557KB/s in 0.3s

2018-08-23 12:53:05 (557 KB/s) - ‘python2-cffi-1.9.1-1.tar.xz’ saved [183976/183976]

python2-cffi-1.9.1-1.tar.xz: OK
Unpacking...
Package python2-cffi requires the following packages, installing:
cygwin libffi6 libgcc1 python2 python2-pycparser
Package cygwin is already installed, skipping
Package libffi6 is already installed, skipping
Package libgcc1 is already installed, skipping
Package python2 is already installed, skipping
Installing python2-pycparser
--2018-08-23 12:53:11-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-pycparser/python2-pycparser/python2-pycparser-2.17-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 87292 (85K) [application/x-xz]
Saving to: ‘python2-pycparser-2.17-1.tar.xz’

python2-pycparser-2.17-1.tar.xz 100%[==================================================================================>] 85.25K 491KB/s in 0.2s

2018-08-23 12:53:11 (491 KB/s) - ‘python2-pycparser-2.17-1.tar.xz’ saved [87292/87292]

python2-pycparser-2.17-1.tar.xz: OK
Unpacking...
Package python2-pycparser requires the following packages, installing:
python2 python2-ply
Package python2 is already installed, skipping
Installing python2-ply
--2018-08-23 12:53:15-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-ply/python2-ply/python2-ply-3.9-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 90500 (88K) [application/x-xz]
Saving to: ‘python2-ply-3.9-1.tar.xz’

python2-ply-3.9-1.tar.xz 100%[==================================================================================>] 88.38K 515KB/s in 0.2s

2018-08-23 12:53:15 (515 KB/s) - ‘python2-ply-3.9-1.tar.xz’ saved [90500/90500]

python2-ply-3.9-1.tar.xz: OK
Unpacking...
Package python2-ply requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-enum34
--2018-08-23 12:53:19-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-enum34/python2-enum34/python2-enum34-1.1.6-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 51176 (50K) [application/x-xz]
Saving to: ‘python2-enum34-1.1.6-1.tar.xz’

python2-enum34-1.1.6-1.tar.xz 100%[==================================================================================>] 49.98K 301KB/s in 0.2s

2018-08-23 12:53:19 (301 KB/s) - ‘python2-enum34-1.1.6-1.tar.xz’ saved [51176/51176]

python2-enum34-1.1.6-1.tar.xz: OK
Unpacking...
Package python2-enum34 requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-idna
--2018-08-23 12:53:22-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-idna/python2-idna/python2-idna-2.5-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 75024 (73K) [application/x-xz]
Saving to: ‘python2-idna-2.5-1.tar.xz’

python2-idna-2.5-1.tar.xz 100%[==================================================================================>] 73.27K 426KB/s in 0.2s

2018-08-23 12:53:23 (426 KB/s) - ‘python2-idna-2.5-1.tar.xz’ saved [75024/75024]

python2-idna-2.5-1.tar.xz: OK
Unpacking...
Package python2-idna requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-ipaddress
--2018-08-23 12:53:28-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-ipaddress/python2-ipaddress/python2-ipaddress-1.0.18-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 29496 (29K) [application/x-xz]
Saving to: ‘python2-ipaddress-1.0.18-1.tar.xz’

python2-ipaddress-1.0.18-1.tar.xz 100%[==================================================================================>] 28.80K --.-KB/s in 0.08s

2018-08-23 12:53:28 (341 KB/s) - ‘python2-ipaddress-1.0.18-1.tar.xz’ saved [29496/29496]

python2-ipaddress-1.0.18-1.tar.xz: OK
Unpacking...
Package python2-ipaddress requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-packaging
--2018-08-23 12:53:31-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-packaging/python2-packaging/python2-packaging-16.8-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 27884 (27K) [application/x-xz]
Saving to: ‘python2-packaging-16.8-1.tar.xz’

python2-packaging-16.8-1.tar.xz 100%[==================================================================================>] 27.23K --.-KB/s in 0.09s

2018-08-23 12:53:32 (312 KB/s) - ‘python2-packaging-16.8-1.tar.xz’ saved [27884/27884]

python2-packaging-16.8-1.tar.xz: OK
Unpacking...
Package python2-packaging requires the following packages, installing:
python2 python2-pyparsing
Package python2 is already installed, skipping
Installing python2-pyparsing
--2018-08-23 12:53:35-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-pyparsing/python2-pyparsing/python2-pyparsing-2.1.10-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 128844 (126K) [application/x-xz]
Saving to: ‘python2-pyparsing-2.1.10-1.tar.xz’

python2-pyparsing-2.1.10-1.tar.xz 100%[==================================================================================>] 125.82K 501KB/s in 0.3s

2018-08-23 12:53:36 (501 KB/s) - ‘python2-pyparsing-2.1.10-1.tar.xz’ saved [128844/128844]

python2-pyparsing-2.1.10-1.tar.xz: OK
Unpacking...
Package python2-pyparsing requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-six
--2018-08-23 12:53:40-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-six/python2-six/python2-six-1.10.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 18708 (18K) [application/x-xz]
Saving to: ‘python2-six-1.10.0-1.tar.xz’

python2-six-1.10.0-1.tar.xz 100%[==================================================================================>] 18.27K --.-KB/s in 0.08s

2018-08-23 12:53:40 (221 KB/s) - ‘python2-six-1.10.0-1.tar.xz’ saved [18708/18708]

python2-six-1.10.0-1.tar.xz: OK
Unpacking...
Package python2-six requires the following packages, installing:
python2
Package python2 is already installed, skipping
Package python2-six is already installed, skipping
Package python2-openssl installed

Installing python2-pip
--2018-08-23 12:53:43-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-pip/python2-pip/python2-pip-9.0.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 765040 (747K) [application/x-xz]
Saving to: ‘python2-pip-9.0.1-1.tar.xz’

python2-pip-9.0.1-1.tar.xz 100%[==================================================================================>] 747.11K 1.23MB/s in 0.6s

2018-08-23 12:53:44 (1.23 MB/s) - ‘python2-pip-9.0.1-1.tar.xz’ saved [765040/765040]

python2-pip-9.0.1-1.tar.xz: OK
Unpacking...
Package python2-pip requires the following packages, installing:
python2 python2-appdirs python2-ipaddress python2-lockfile python2-lxml python2-packaging python2-pyparsing python2-requests python2-setuptools python2-six python2-wheel
Package python2 is already installed, skipping
Installing python2-appdirs
--2018-08-23 12:53:52-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-appdirs/python2-appdirs/python2-appdirs-1.4.3-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 11868 (12K) [application/x-xz]
Saving to: ‘python2-appdirs-1.4.3-1.tar.xz’

python2-appdirs-1.4.3-1.tar.xz 100%[==================================================================================>] 11.59K --.-KB/s in 0.002s

2018-08-23 12:53:52 (6.77 MB/s) - ‘python2-appdirs-1.4.3-1.tar.xz’ saved [11868/11868]

python2-appdirs-1.4.3-1.tar.xz: OK
Unpacking...
Package python2-appdirs requires the following packages, installing:
python2
Package python2 is already installed, skipping
Package python2-ipaddress is already installed, skipping
Installing python2-lockfile
--2018-08-23 12:53:55-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-lockfile/python2-lockfile/python2-lockfile-0.12.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 15388 (15K) [application/x-xz]
Saving to: ‘python2-lockfile-0.12.2-1.tar.xz’

python2-lockfile-0.12.2-1.tar.xz 100%[==================================================================================>] 15.03K --.-KB/s in 0.08s

2018-08-23 12:53:56 (182 KB/s) - ‘python2-lockfile-0.12.2-1.tar.xz’ saved [15388/15388]

python2-lockfile-0.12.2-1.tar.xz: OK
Unpacking...
Package python2-lockfile requires the following packages, installing:
python2
Package python2 is already installed, skipping
Installing python2-lxml
--2018-08-23 12:53:59-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/python-lxml/python2-lxml/python2-lxml-3.7.3-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 884504 (864K) [application/x-xz]
Saving to: ‘python2-lxml-3.7.3-1.tar.xz’

python2-lxml-3.7.3-1.tar.xz 100%[==================================================================================>] 863.77K 1.26MB/s in 0.7s

2018-08-23 12:54:01 (1.26 MB/s) - ‘python2-lxml-3.7.3-1.tar.xz’ saved [884504/884504]

python2-lxml-3.7.3-1.tar.xz: OK
Unpacking...
Package python2-lxml requires the following packages, installing:
cygwin libxml2 libxslt python2
Package cygwin is already installed, skipping
Package libxml2 is already installed, skipping
Installing libxslt
--2018-08-23 12:54:05-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libxslt/libxslt-1.1.29-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 194772 (190K) [application/x-xz]
Saving to: ‘libxslt-1.1.29-1.tar.xz’

libxslt-1.1.29-1.tar.xz 100%[==================================================================================>] 190.21K 563KB/s in 0.3s

2018-08-23 12:54:06 (563 KB/s) - ‘libxslt-1.1.29-1.tar.xz’ saved [194772/194772]

libxslt-1.1.29-1.tar.xz: OK
Unpacking...
Package libxslt requires the following packages, installing:
cygwin libgcrypt20 libxml2
Package cygwin is already installed, skipping
Installing libgcrypt20
--2018-08-23 12:54:09-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libgcrypt/libgcrypt20/libgcrypt20-1.8.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 498460 (487K) [application/x-xz]
Saving to: ‘libgcrypt20-1.8.2-1.tar.xz’

libgcrypt20-1.8.2-1.tar.xz 100%[==================================================================================>] 486.78K 932KB/s in 0.5s

2018-08-23 12:54:10 (932 KB/s) - ‘libgcrypt20-1.8.2-1.tar.xz’ saved [498460/498460]

libgcrypt20-1.8.2-1.tar.xz: OK
Unpacking...
Package libgcrypt20 requires the following packages, installing:
cygwin libgpg-error0
Package cygwin is already installed, skipping
Installing libgpg-error0
--2018-08-23 12:54:13-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libgpg-error/libgpg-error0/libgpg-error0-1.28-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 167524 (164K) [application/x-xz]
Saving to: ‘libgpg-error0-1.28-1.tar.xz’

libgpg-error0-1.28-1.tar.xz 100%[==================================================================================>] 163.60K 484KB/s in 0.3s

2018-08-23 12:54:14 (484 KB/s) - ‘libgpg-error0-1.28-1.tar.xz’ saved [167524/167524]

libgpg-error0-1.28-1.tar.xz: OK
Unpacking...
Package libgpg-error0 requires the following packages, installing:
cygwin libintl8
Package cygwin is already installed, skipping
Package libintl8 is already installed, skipping
Package libxml2 is already installed, skipping
Package python2 is already installed, skipping
Package python2-packaging is already installed, skipping
Package python2-pyparsing is already installed, skipping
Installing python2-requests
--2018-08-23 12:54:18-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-requests/python2-requests/python2-requests-2.13.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 85908 (84K) [application/x-xz]
Saving to: ‘python2-requests-2.13.0-1.tar.xz’

python2-requests-2.13.0-1.tar.xz 100%[==================================================================================>] 83.89K 485KB/s in 0.2s

2018-08-23 12:54:18 (485 KB/s) - ‘python2-requests-2.13.0-1.tar.xz’ saved [85908/85908]

python2-requests-2.13.0-1.tar.xz: OK
Unpacking...
Package python2-requests requires the following packages, installing:
ca-certificates python2 python2-chardet python2-idna python2-urllib3
Package ca-certificates is already installed, skipping
Package python2 is already installed, skipping
Installing python2-chardet
--2018-08-23 12:54:22-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-chardet/python2-chardet/python2-chardet-2.3.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 186780 (182K) [application/x-xz]
Saving to: ‘python2-chardet-2.3.0-1.tar.xz’

python2-chardet-2.3.0-1.tar.xz 100%[==================================================================================>] 182.40K 542KB/s in 0.3s

2018-08-23 12:54:23 (542 KB/s) - ‘python2-chardet-2.3.0-1.tar.xz’ saved [186780/186780]

python2-chardet-2.3.0-1.tar.xz: OK
Unpacking...
Package python2-chardet requires the following packages, installing:
python2
Package python2 is already installed, skipping
Package python2-idna is already installed, skipping
Installing python2-urllib3
--2018-08-23 12:54:27-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-urllib3/python2-urllib3/python2-urllib3-1.20-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 111760 (109K) [application/x-xz]
Saving to: ‘python2-urllib3-1.20-1.tar.xz’

python2-urllib3-1.20-1.tar.xz 100%[==================================================================================>] 109.14K 435KB/s in 0.3s

2018-08-23 12:54:28 (435 KB/s) - ‘python2-urllib3-1.20-1.tar.xz’ saved [111760/111760]

python2-urllib3-1.20-1.tar.xz: OK
Unpacking...
Package python2-urllib3 requires the following packages, installing:
python2 python2-backports.ssl_match_hostname python2-cryptography python2-openssl python2-six
Package python2 is already installed, skipping
Installing python2-backports.ssl_match_hostname
--2018-08-23 12:54:31-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-backports.ssl_match_hostname/python2-backports.ssl_match_hostname/python2-backports.ssl_match_hostname-3.5.0.1-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 5308 (5.2K) [application/x-xz]
Saving to: ‘python2-backports.ssl_match_hostname-3.5.0.1-1.tar.xz’

python2-backports.ssl_match_hostname-3.5 100%[==================================================================================>] 5.18K --.-KB/s in 0s

2018-08-23 12:54:32 (33.2 MB/s) - ‘python2-backports.ssl_match_hostname-3.5.0.1-1.tar.xz’ saved [5308/5308]

python2-backports.ssl_match_hostname-3.5.0.1-1.tar.xz: OK
Unpacking...
Package python2-backports.ssl_match_hostname requires the following packages, installing:
python2 python2-ipaddress
Package python2 is already installed, skipping
Package python2-ipaddress is already installed, skipping
Package python2-cryptography is already installed, skipping
Package python2-openssl is already installed, skipping
Package python2-six is already installed, skipping
Installing python2-setuptools
--2018-08-23 12:54:35-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-setuptools/python2-setuptools/python2-setuptools-34.3.2-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 349612 (341K) [application/x-xz]
Saving to: ‘python2-setuptools-34.3.2-1.tar.xz’

python2-setuptools-34.3.2-1.tar.xz 100%[==================================================================================>] 341.42K 802KB/s in 0.4s

2018-08-23 12:54:37 (802 KB/s) - ‘python2-setuptools-34.3.2-1.tar.xz’ saved [349612/349612]

python2-setuptools-34.3.2-1.tar.xz: OK
Unpacking...
Package python2-setuptools requires the following packages, installing:
python2 python2-appdirs python2-packaging python2-six
Package python2 is already installed, skipping
Package python2-appdirs is already installed, skipping
Package python2-packaging is already installed, skipping
Package python2-six is already installed, skipping
Package python2-six is already installed, skipping
Installing python2-wheel
--2018-08-23 12:54:42-- http://mirrors.kernel.org/sourceware/cygwin//noarch/release/python-wheel/python2-wheel/python2-wheel-0.30.0a0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 88992 (87K) [application/x-xz]
Saving to: ‘python2-wheel-0.30.0a0-1.tar.xz’

python2-wheel-0.30.0a0-1.tar.xz 100%[==================================================================================>] 86.91K 502KB/s in 0.2s

2018-08-23 12:54:43 (502 KB/s) - ‘python2-wheel-0.30.0a0-1.tar.xz’ saved [88992/88992]

python2-wheel-0.30.0a0-1.tar.xz: OK
Unpacking...
Package python2-wheel requires the following packages, installing:
python2 python2-setuptools
Package python2 is already installed, skipping
Package python2-setuptools is already installed, skipping
Package python2-pip installed
Package python2-setuptools is already installed, skipping

Installing tree
--2018-08-23 12:54:48-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/tree/tree-1.7.0-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 46456 (45K) [application/x-xz]
Saving to: ‘tree-1.7.0-1.tar.xz’

tree-1.7.0-1.tar.xz 100%[==================================================================================>] 45.37K 272KB/s in 0.2s

2018-08-23 12:54:49 (272 KB/s) - ‘tree-1.7.0-1.tar.xz’ saved [46456/46456]

tree-1.7.0-1.tar.xz: OK
Unpacking...
Package tree requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package tree installed

Installing make
--2018-08-23 12:54:51-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/make/make-4.2.1-2.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 459228 (448K) [application/x-xz]
Saving to: ‘make-4.2.1-2.tar.xz’

make-4.2.1-2.tar.xz 100%[==================================================================================>] 448.46K 875KB/s in 0.5s

2018-08-23 12:54:52 (875 KB/s) - ‘make-4.2.1-2.tar.xz’ saved [459228/459228]

make-4.2.1-2.tar.xz: OK
Unpacking...
Package make requires the following packages, installing:
cygwin libguile17 libguile2.0_22 libintl8
Package cygwin is already installed, skipping
Installing libguile17
--2018-08-23 12:54:55-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/guile1.8/libguile17/libguile17-1.8.8-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 559092 (546K) [application/x-xz]
Saving to: ‘libguile17-1.8.8-3.tar.xz’

libguile17-1.8.8-3.tar.xz 100%[==================================================================================>] 545.99K 1.04MB/s in 0.5s

2018-08-23 12:54:58 (1.04 MB/s) - ‘libguile17-1.8.8-3.tar.xz’ saved [559092/559092]

libguile17-1.8.8-3.tar.xz: OK
Unpacking...
Package libguile17 requires the following packages, installing:
bash cygwin libcrypt0 libgmp10 libintl8 libltdl7 libreadline7
Package bash is already installed, skipping
Package cygwin is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libgmp10 is already installed, skipping
Package libintl8 is already installed, skipping
Installing libltdl7
--2018-08-23 12:55:03-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libtool/libltdl7/libltdl7-2.4.6-6.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 13956 (14K) [application/x-xz]
Saving to: ‘libltdl7-2.4.6-6.tar.xz’

libltdl7-2.4.6-6.tar.xz 100%[==================================================================================>] 13.63K --.-KB/s in 0.08s

2018-08-23 12:55:04 (165 KB/s) - ‘libltdl7-2.4.6-6.tar.xz’ saved [13956/13956]

libltdl7-2.4.6-6.tar.xz: OK
Unpacking...
Package libltdl7 requires the following packages, installing:
cygwin
Package cygwin is already installed, skipping
Package libreadline7 is already installed, skipping
Installing libguile2.0_22
--2018-08-23 12:55:07-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/guile2.0/libguile2.0_22/libguile2.0_22-2.0.14-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 2235304 (2.1M) [application/x-xz]
Saving to: ‘libguile2.0_22-2.0.14-3.tar.xz’

libguile2.0_22-2.0.14-3.tar.xz 100%[==================================================================================>] 2.13M 1.88MB/s in 1.1s

2018-08-23 12:55:09 (1.88 MB/s) - ‘libguile2.0_22-2.0.14-3.tar.xz’ saved [2235304/2235304]

libguile2.0_22-2.0.14-3.tar.xz: OK
Unpacking...
Package libguile2.0_22 requires the following packages, installing:
cygwin libcrypt0 libffi6 libgc1 libgc2 libgcc1 libgmp10 libiconv2 libintl8 libltdl7 libreadline7 libunistring2
Package cygwin is already installed, skipping
Package libcrypt0 is already installed, skipping
Package libffi6 is already installed, skipping
Installing libgc1
--2018-08-23 12:55:18-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libgc/libgc1/libgc1-7.6.8-1.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 52216 (51K) [application/x-xz]
Saving to: ‘libgc1-7.6.8-1.tar.xz’

libgc1-7.6.8-1.tar.xz 100%[==================================================================================>] 50.99K 299KB/s in 0.2s

2018-08-23 12:55:19 (299 KB/s) - ‘libgc1-7.6.8-1.tar.xz’ saved [52216/52216]

libgc1-7.6.8-1.tar.xz: OK
Unpacking...
Package libgc1 requires the following packages, installing:
cygwin libgcc1
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Installing libgc2
--2018-08-23 12:55:22-- http://mirrors.kernel.org/sourceware/cygwin//x86_64/release/libgc/libgc2/libgc2-7.6.2-3.tar.xz
Resolving www-my-proxy.com... 127.0.0.1
Connecting to www-my-proxy.com|127.0.0.1|:80... connected.
Proxy request sent, awaiting response... 200 OK
Length: 51224 (50K) [application/x-xz]
Saving to: ‘libgc2-7.6.2-3.tar.xz’

libgc2-7.6.2-3.tar.xz 100%[==================================================================================>] 50.02K 304KB/s in 0.2s

2018-08-23 12:55:22 (304 KB/s) - ‘libgc2-7.6.2-3.tar.xz’ saved [51224/51224]

libgc2-7.6.2-3.tar.xz: OK
Unpacking...
Package libgc2 requires the following packages, installing:
cygwin libgcc1
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgmp10 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libintl8 is already installed, skipping
Package libltdl7 is already installed, skipping
Package libreadline7 is already installed, skipping
Package libunistring2 is already installed, skipping
Package libintl8 is already installed, skipping
Package make installed
$

ok, let's try to install ansible now:

$ apt-cyg install ansible
Installing ansible
Unable to locate package ansible

OK, This method was extremely slow and time consuming to keep going, so I tried the

2.- option the alias mentioned before but with specific steps on this question on stackoverflow

Assuming Cygwin is installed:

Open up a Cygwin Terminal
alias cyg-get="/path/to/cygwin/setup/package/setup-x86_64.exe -q -P"
cyg-get cygwin32-gcc-g++,gcc-core,gcc-g++,git,libffi-devel,nano,openssl,openssl-devel,python-crypto,python3,python3-devel,python3-openssl,python3-pip,python3-setuptools,python3-devel,tree,wget,zip,make
The lack of spaces and the presence of commas here is important!
Upgrade pip via pip3 install --upgrade pip
pip install ansible

Notes:
The cyg-get alias allows you to install all packages via the command line instead of searching in the Cygwin UI.
The ansible installation includes a step where "Running setup.py bdist_wheel for pynacl" is executed - this takes at least half an hour but does eventually complete.

And so, that's what I tried and worked as expected but took some time to complete:

$ cyg-get cygwin32-gcc-g++,gcc-core,gcc-g++,git,libffi-devel,nano,openssl,openssl-devel,python-crypto,python3,python3-devel,python3-openssl,python3-pip,python3-setuptools,python3-devel,tree,wget,zip,make
Starting cygwin install, version 2.893
User has backup/restore rights
Current Directory: D:\Cygwin
Could not open service McShield for query, start and stop. McAfee may not be installed, or we don't have access.
root: D:\cygwin64 system
Selected local directory: D:\Cygwin
net: Preconfig
site: http://mirrors.kernel.org/sourceware/cygwin/
solving: 7 tasks, update: no, use test packages: no
Augmented Transaction List:
0 install python3 3.6.4-1
1 install zip 3.0-12
2 install libnettle6 3.4-1
3 install python3-ply 3.9-1
4 install python3-chardet 2.3.0-1
5 install python3-asn1crypto 0.22.0-1
6 install python3-idna 2.5-1
7 install python3-pyparsing 2.1.10-1
8 install python3-lxml 3.7.3-1
9 install python3-six 1.10.0-1
10 install python3-lockfile 0.12.2-1
11 install python3-appdirs 1.4.3-1
12 install python3-devel 3.6.4-1
13 install libhogweed4 3.4-1
14 install python3-pycparser 2.17-1
15 install python3-packaging 16.8-1
16 install libgnutls30 3.5.18-1
17 install python3-cffi 1.9.1-1
18 install python3-setuptools 34.3.2-1
19 install wget 1.19.1-2
20 erase wget 1.19-1
21 install python3-cryptography 1.8.1-1
22 install python3-wheel 0.30.0a0-1
23 install python3-openssl 16.2.0-1
24 install python3-urllib3 1.20-1
25 install python3-requests 2.13.0-1
26 install python3-pip 9.0.1-1
Augmented Transaction List:
0 install python3 3.6.4-1
1 install zip 3.0-12
2 install libnettle6 3.4-1
3 install python3-ply 3.9-1
4 install python3-chardet 2.3.0-1
5 install python3-asn1crypto 0.22.0-1
6 install python3-idna 2.5-1
7 install python3-pyparsing 2.1.10-1
8 install python3-lxml 3.7.3-1
9 install python3-six 1.10.0-1
10 install python3-lockfile 0.12.2-1
11 install python3-appdirs 1.4.3-1
12 install python3-devel 3.6.4-1
13 install libhogweed4 3.4-1
14 install python3-pycparser 2.17-1
15 install python3-packaging 16.8-1
16 install libgnutls30 3.5.18-1
17 install python3-cffi 1.9.1-1
18 install python3-setuptools 34.3.2-1
19 install wget 1.19.1-2
20 erase wget 1.19-1
21 install python3-cryptography 1.8.1-1
22 install python3-wheel 0.30.0a0-1
23 install python3-openssl 16.2.0-1
24 install python3-urllib3 1.20-1
25 install python3-requests 2.13.0-1
26 install python3-pip 9.0.1-1
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python3/python3-3.6.4-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/zip/zip-3.0-12.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/nettle/libnettle6/libnettle6-3.4-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-ply/python3-ply/python3-ply-3.9-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-chardet/python3-chardet/python3-chardet-2.3.0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-asn1crypto/python3-asn1crypto/python3-asn1crypto-0.22.0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-idna/python3-idna/python3-idna-2.5-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pyparsing/python3-pyparsing/python3-pyparsing-2.1.10-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-lxml/python3-lxml/python3-lxml-3.7.3-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-six/python3-six/python3-six-1.10.0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-lockfile/python3-lockfile/python3-lockfile-0.12.2-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-appdirs/python3-appdirs/python3-appdirs-1.4.3-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python3/python3-devel/python3-devel-3.6.4-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/nettle/libhogweed4/libhogweed4-3.4-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pycparser/python3-pycparser/python3-pycparser-2.17-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-packaging/python3-packaging/python3-packaging-16.8-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/gnutls/libgnutls30/libgnutls30-3.5.18-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-cffi/python3-cffi/python3-cffi-1.9.1-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-setuptools/python3-setuptools/python3-setuptools-34.3.2-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/wget/wget-1.19.1-2.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-cryptography/python3-cryptography/python3-cryptography-1.8.1-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-wheel/python3-wheel/python3-wheel-0.30.0a0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-openssl/python3-openssl/python3-openssl-16.2.0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-urllib3/python3-urllib3/python3-urllib3-1.20-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-requests/python3-requests/python3-requests-2.13.0-1.tar.xz
Downloaded D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pip/python3-pip/python3-pip-9.0.1-1.tar.xz
running: D:\cygwin64\bin\bash.exe --norc --noprofile "/etc/preremove/wget.sh"
Uninstalling wget
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python3/python3-3.6.4-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/zip/zip-3.0-12.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/nettle/libnettle6/libnettle6-3.4-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-ply/python3-ply/python3-ply-3.9-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-chardet/python3-chardet/python3-chardet-2.3.0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-asn1crypto/python3-asn1crypto/python3-asn1crypto-0.22.0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-idna/python3-idna/python3-idna-2.5-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pyparsing/python3-pyparsing/python3-pyparsing-2.1.10-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-lxml/python3-lxml/python3-lxml-3.7.3-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-six/python3-six/python3-six-1.10.0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-lockfile/python3-lockfile/python3-lockfile-0.12.2-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-appdirs/python3-appdirs/python3-appdirs-1.4.3-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python3/python3-devel/python3-devel-3.6.4-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/nettle/libhogweed4/libhogweed4-3.4-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pycparser/python3-pycparser/python3-pycparser-2.17-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-packaging/python3-packaging/python3-packaging-16.8-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/gnutls/libgnutls30/libgnutls30-3.5.18-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-cffi/python3-cffi/python3-cffi-1.9.1-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-setuptools/python3-setuptools/python3-setuptools-34.3.2-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/wget/wget-1.19.1-2.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/x86_64/release/python-cryptography/python3-cryptography/python3-cryptography-1.8.1-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-wheel/python3-wheel/python3-wheel-0.30.0a0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-openssl/python3-openssl/python3-openssl-16.2.0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-urllib3/python3-urllib3/python3-urllib3-1.20-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-requests/python3-requests/python3-requests-2.13.0-1.tar.xz
Extracting from file://D:\Cygwin/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin%2f/noarch/release/python-pip/python3-pip/python3-pip-9.0.1-1.tar.xz
Changing gid back to original
running: D:\cygwin64\bin\dash.exe "/etc/postinstall/0p_000_autorebase.dash"
running: D:\cygwin64\bin\dash.exe "/etc/postinstall/0p_update-info-dir.dash"
running: D:\cygwin64\bin\bash.exe --norc --noprofile "/etc/postinstall/wget.sh"
Changing gid to Administrators
Ending cygwin install

This was fast, here comes the part that took longer:

$ pip3 install --upgrade pip
Collecting pip
Downloading https://files.pythonhosted.org/packages/5f/25/e52d3f31441505a5f3af41213346e5b6c221c9e086a166f3703d2ddaf940/pip-18.0-py2.py3-none-any.whl (1.3MB)
100% |████████████████████████████████| 1.3MB 832kB/s
Installing collected packages: pip
Found existing installation: pip 9.0.1
Uninstalling pip-9.0.1:
Successfully uninstalled pip-9.0.1
Successfully installed pip-18.0

$
$ pip install ansible
Collecting ansible
Downloading https://files.pythonhosted.org/packages/97/1b/13fe0d24588db0426c41be442d6d74bc861a72ed1338dfbce94e8082148d/ansible-2.6.3.tar.gz (10.7MB)
100% |████████████████████████████████| 10.8MB 1.5MB/s
Collecting jinja2 (from ansible)
Downloading https://files.pythonhosted.org/packages/7f/ff/ae64bacdfc95f27a016a7bed8e8686763ba4d277a78ca76f32659220a731/Jinja2-2.10-py2.py3-none-any.whl (126kB)
100% |████████████████████████████████| 133kB 547kB/s
Collecting PyYAML (from ansible)
Downloading https://files.pythonhosted.org/packages/9e/a3/1d13970c3f36777c583f136c136f804d70f500168edc1edea6daa7200769/PyYAML-3.13.tar.gz (270kB)
100% |████████████████████████████████| 276kB 898kB/s
Collecting paramiko (from ansible)
Downloading https://files.pythonhosted.org/packages/3e/db/cb7b6656e0e7387637ce850689084dc0b94b44df31cc52e5fc5c2c4fd2c1/paramiko-2.4.1-py2.py3-none-any.whl (194kB)
100% |████████████████████████████████| 194kB 906kB/s
Requirement already satisfied: cryptography in /usr/lib/python3.6/site-packages (from ansible) (1.8.1)
Requirement already satisfied: setuptools in /usr/lib/python3.6/site-packages (from ansible) (34.3.2)
Collecting MarkupSafe>=0.23 (from jinja2->ansible)
Downloading https://files.pythonhosted.org/packages/4d/de/32d741db316d8fdb7680822dd37001ef7a448255de9699ab4bfcbdf4172b/MarkupSafe-1.0.tar.gz
Collecting pyasn1>=0.1.7 (from paramiko->ansible)
Downloading https://files.pythonhosted.org/packages/d1/a1/7790cc85db38daa874f6a2e6308131b9953feb1367f2ae2d1123bb93a9f5/pyasn1-0.4.4-py2.py3-none-any.whl (72kB)
100% |████████████████████████████████| 81kB 470kB/s
Collecting pynacl>=1.0.1 (from paramiko->ansible)
Downloading https://files.pythonhosted.org/packages/08/19/cf56e60efd122fa6d2228118a9b345455b13ffe16a14be81d025b03b261f/PyNaCl-1.2.1.tar.gz (3.3MB)
100% |████████████████████████████████| 3.3MB 3.1MB/s
Collecting bcrypt>=3.1.3 (from paramiko->ansible)
Downloading https://files.pythonhosted.org/packages/f3/ec/bb6b384b5134fd881b91b6aa3a88ccddaad0103857760711a5ab8c799358/bcrypt-3.1.4.tar.gz (42kB)
100% |████████████████████████████████| 51kB 252kB/s
Requirement already satisfied: cffi>=1.4.1 in /usr/lib/python3.6/site-packages (from cryptography->ansible) (1.9.1)
Requirement already satisfied: idna>=2.1 in /usr/lib/python3.6/site-packages (from cryptography->ansible) (2.5)
Requirement already satisfied: asn1crypto>=0.21.0 in /usr/lib/python3.6/site-packages (from cryptography->ansible) (0.22.0)
Requirement already satisfied: six>=1.4.1 in /usr/lib/python3.6/site-packages (from cryptography->ansible) (1.10.0)
Requirement already satisfied: packaging in /usr/lib/python3.6/site-packages (from cryptography->ansible) (16.8)
Requirement already satisfied: appdirs>=1.4.0 in /usr/lib/python3.6/site-packages (from setuptools->ansible) (1.4.3)
Requirement already satisfied: pycparser in /usr/lib/python3.6/site-packages (from cffi>=1.4.1->cryptography->ansible) (2.17)
Requirement already satisfied: pyparsing in /usr/lib/python3.6/site-packages (from packaging->cryptography->ansible) (2.1.10)
Building wheels for collected packages: ansible, PyYAML, MarkupSafe, pynacl, bcrypt
Running setup.py bdist_wheel for ansible ... done
Stored in directory: /home/user/.cache/pip/wheels/aa/55/03/f33988e2533ea04056a2bf2636a5bf645bd4a3d2665151d3f2
Running setup.py bdist_wheel for PyYAML ... done
Stored in directory: /home/user/.cache/pip/wheels/ad/da/0c/74eb680767247273e2cf2723482cb9c924fe70af57c334513f
Running setup.py bdist_wheel for MarkupSafe ... done
Stored in directory: /home/user/.cache/pip/wheels/33/56/20/ebe49a5c612fffe1c5a632146b16596f9e64676768661e4e46
Running setup.py bdist_wheel for pynacl ... done
Stored in directory: /home/user/.cache/pip/wheels/22/ad/26/c5592436ff0cad6f4f629e8267cab5ff5795ef0acb8234972e
Running setup.py bdist_wheel for bcrypt ... done
Stored in directory: /home/user/.cache/pip/wheels/4a/80/07/163d01f8b5d52ed815960b532dd7aece342bccbeb2b47361fd
Successfully built ansible PyYAML MarkupSafe pynacl bcrypt
Installing collected packages: MarkupSafe, jinja2, PyYAML, pyasn1, pynacl, bcrypt, paramiko, ansible
Successfully installed MarkupSafe-1.0 PyYAML-3.13 ansible-2.6.3 bcrypt-3.1.4 jinja2-2.10 paramiko-2.4.1 pyasn1-0.4.4 pynacl-1.2.1
$
$ which ansible
/usr/bin/ansible

And ansible worked but not with the VM started with Vagrant, which is why I had to install it. :-(

UPDATE Aug 31th:

After doing an upgrade to Vagrant, this is working as expected:

$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'centos/7' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
default: No guest additions were detected on the base box for this VM! Guest
default: additions are required for forwarded ports, shared folders, host only
default: networking, and more. If SSH fails on this machine, please install
default: the guest additions and repackage the box to continue.
default:
default: This is not an error message; everything may continue to work properly,
default: in which case you may ignore this message.
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
==> default: Rsyncing folder: /cygdrive/d/VT/ => /vagrant
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.

$ ansible-playbook -i host myplaybook.yml

PLAY [boxes] *******************************************************************************************************************************************************************************************************************

TASK [Gathering Facts] *********************************************************************************************************************************************************************************************************
ok: [box]

TASK [debug] *******************************************************************************************************************************************************************************************************************
ok: [box] =>; {
"msg": "I am connecting to 10.12.5.8 which is running CentOS 7.5.1804"
}

PLAY RECAP *********************************************************************************************************************************************************************************************************************
box : ok=2 changed=0 unreachable=0 failed=0

Espacio Mixto

Installing ansible on Windows 7 using Cygwin64

No hay comentarios.:

Etiquetas